Adam Dickson

out of tolerance holes on reinforcing bracket

4 years ago
| Working on: Elevator

On de-rivettting, one of the holes is 4.5mm long, excessively (>4.3mm) elongated from the earlier match drill. Consider replacement

Author

avatar
Adam Dickson Patreon Donor
Slow-build of a TAF Sling 2 under E-AB category
Profile
Previous post:
re-clecoing skin with disassembled control horn brackets re-clecoing skin with disassembled control horn brackets

This post is from Adam Dickson

Next post:
in-spec holes in spar and doubler in-spec holes in spar and doubler