Adam Dickson

Correction of wingtips part 8 - Rebuild wingtip light cable-alignment holes

2 years ago
| Working on: Main wing

photo essay. The original holes were made oversize owing to slightly incorrect placement. I felt the resultant slop and possible movement of the nav strobe lights could be prevented by revisiting this

Holes patched with fibreglass sheet and redrilled to exactly align the nav strobe lights horizontal with no slop

Holes patched with fibreglass sheet and redrilled to exactly align the nav strobe lights horizontal with no slop

Author

avatar
Adam Dickson Patreon Donor
Slow-build of a TAF Sling 2 under E-AB category
Profile
Previous post:
Correction of wingtips part 7 - build up wingtip edge top surfaces and tips Correction of wingtips part 7 - build up wingtip edge top surfaces and tips

This post is from Adam Dickson

Next post:
Correction of wingtips part 9 - Gelcoat filler to achieve smooth surfaces and transitions with prefect fit Correction of wingtips part 9 - Gelcoat filler to achieve smooth surfaces and transitions with prefect fit