Correction of wingtips part 13 - improve fit of RH wingtip nose
When doing a final fit of the wingtips I noticed the fit of the (previously unaltered) right-hand wingtip nose left a bit to be desired. This area was built up and adjusted for a precise fit to the skin, then reprimed. Actually, 2 iterations gelcoat filler required.
Before adjustment, a small gap present, worse on the bottom side, partly due to the wingtip nose rolling off too soon
Initial shape set by moulding
After 1st iteration - I sanded away too much filler. I had to reapply a layer of additional gelcoat and do repeated checks and adjustments.
Final result!
Recheck level
Author
This post is from Adam Dickson
