Test fit landing gear

I was able to get 3 of 4 bolts in with hand force. Only one bolt might need a bit of tapping. Sling have come along way with the precision of this item, judging by the measures previously advised to get this to fit. I confirmed the width of the landing gear to be 130mm, while the interior dimension of the landing gear box to be 139.5mm. Plenty of clearance for rivet heads, etc. There was also plenty of clearance between the top surface of the landing gear and the interior top surface of the landing gear box, ample clearance for the rivet heads and for flexural movement. I did note that washers or a shim are needed between the landing gear and the steel upright channel. This is not noted in the manuals, so will follow up with Sling.