Phosphor-bronze PIDG spade connectors for engine temp sensors, regulator, and 1A fuse-box

Oil temp sensor (x1) and coolant sensors (x2) all Rotax P/N 965531

Spade terminal 6.3x0.8mm required

Since 20AWG wire will be used (since routed directly to pins on EMS220) the following is appropriate.

22-16 AWG:

9-160583-5 AMP - TE CONNECTIVITY, Quick Disconnect Terminal, PIDG FASTON, Female Quick Disconnect | element14 Australia - phosphor bronze

The TE 58433-3 crimper is suitable for both

B&C AVC 1 regulator

The following are all phosphor bronze

For 12-10 AWG:

61198-2 | TE Connectivity PIDG FASTON .250 Yellow Insulated Female Spade Connector, Crimp, 0.3 x 0.032 in Tab Size 12 AWG to 10 | RS - MOQ 50

For 14-12 AWG:

42844-2 : FASTON Quick Disconnects | TE Connectivity

42844-2 TE Connectivity AMP Connectors | Connectors, Interconnects | DigiKey

For 16-14 AWG:

9-160313-5 AMP - TE CONNECTIVITY, Quick Disconnect Terminal, PIDG FASTON, Female Quick Disconnect | element14 Australia - phosphor bronze

For 16-22 AWG

9-160583-5 AMP - TE CONNECTIVITY, Quick Disconnect Terminal, PIDG FASTON, Female Quick Disconnect | element14 Australia - phosphor bronze

Piggy-back terminal for connecting 22000uF filter capacitor

16-14AWG

9-160463-5 TE Connectivity AMP Connectors | Connectors, Interconnects | DigiKey - phosphor bronze - MOQ 1

Need to use 14AWG wire to connect capacitor