Horizontal stabiliser closing top skin
Added top skin to horizontal stab. Note that the elevator section is cut from the back of this between the two spars at rear. This ensures that the elevator perfectly matches shape with the stab
lots of sanding and cleaning to prep for top skin
Pre-wetting all surfaces
Adding all this flock took many hands
Ready to seat top skin, note minimal flock on leading edge, as the skins overlap, and end up with a couple of layers on top
Top skin on!
Temporarily holding leading edge together with screws while epoxy cures
Clamped down, making sure the skin is sitting evenly on the ribs and spars
Author
Darren Dreis
Patreon Donor
This post is from Darren and Lee's Whisper X350 Gen II
