Left wing, bonding top skin
Nice bit of progress on our last day at Whisper, bonding the left wing top skin... lots of sanding and cleaning prep... used about 1kg of epoxy and flox mix
Pre-wetting bonding surfaces
Lots of epoxy flock, much easier with caulking gun
Smoothing out the flock
The moment of truth
Getting even pressure front to back after screwing the leading edge together (screws will be removed and filled with additional leading edge layers of carbon)
Filling some epoxy gaps on the inboard rib
Adding weights over the spar and rear ribs
checking epoxy flock on fuel tank ribs
Rear ribs look good, although once inspection ports are cut, some strengthening layups will be added between skin and ribs/spar
Lots of sanding
Author
This post is from Darren and Lee's Whisper X350 Gen II
