Panel wiring and elev servo test fit
Lots of work on the panel last 2 weeks. All the Dynon components fitted. Wired radio, adsb receiver and intercom + headset jacks. Tested and all looks good. AV30 backup instrument all good, and 3 warning lights above the panel (not yet wired). ECU, Low Volts and Parking brake.
The thru-panel jacks are for USB (Dynon), and ethernet (VPX)
Lower panel switches, LED's driven by a 5v power supply (bottom left), keeps the resistor current down. Will have a pwm amp from the dynon so all the dimming is linked
The beginnings of a nice birds next in there!
Dynon components wired, with AV30 in center as backup instrument
Test fit elevator servo connected to the main bellcrank. Currently using the standard length arm. Have tested and there's just enough travel, but I will change to a long arm anyway
Author
This post is from Darren and Lee's Whisper X350 Gen II
