27 Oct 2024

Installed ducting from heater to front (panel) side vents. Reconfigured one heater outlet with a 50mm T (expanded on the longer side) facing fore-aft at a slight angle (not 100% longitudinal) to provide access to clamps, other hoses etc. This is joined to SCEET tubing at the rear (to be replaced with aluminium ducting as it is easier to form) which joins to the rear footwell ducting and the front will join up with the front footwell vents. This leaves one outlet free for the windscreen defrost - Sling does not recommend connecting it, so I'll install an Aerosport Products cutoff valve (like the front side vents) to provide the option to turn it off if necessary.

Installed rivnuts and grommets in the air filter housing.