Tailcone

Calling it a day, riveted about half of the left skin in place. I chose to back-rivet so I wouldn't damage the skin, this is a little bit of a challenge for 1 person but doable.

After installing the Aft bottom skin 3 times I finally got it in place the correct way. I set the tailcone on its side to rivet the Aft bottom skin.

Both skins are now clecoed, now I need to install the Aft bottom skin.

Left skin in place.

Wiring harness completed.

Making progress on the harness, ELT line, ELT antenna cable.

Started running the aft wire harness before I clecoed the skins.