Nick's Sling TSi

Rear fuselage Rib Assembly 1

We put together the rear assembly. It took us a while as some of the instructions were unclear about what to not rivet which took some discussion. We made a mistake by not clecoing both parts needed and we had to drill out 3 rivets (first mistake) which cost us quite a lot of time so not to damage any of the parts.

You need to be careful about which parts to rivet first as there is no indication in the manual and can result in some areas being very difficult to reach.

Previous post:
Rear Fuselage Rib 2 Rear Fuselage Rib 2

This post is from Nick's Sling TSi