Scott's RV-14 Build

Nut Plates Finished

Spent the day installing all the remaining nut plates in the rear fuselage. They all went in relatively trouble free. Did a combination of bucking and squeezing rivets. 16 are for the two access covers on each side and the remaining 12 are used to secure fairings around the rudder and horizontal stab. I chose to do the optional flush screw mounting for the access covers so #27 dimpled the screw holes and ordered the needed AN507-632 flush screws from Aircraft Spruce which aren't included in the kit.

Previous post:
Nutplates Nutplates

This post is from Scott's RV-14 Build