Fuel Line Brackets Installed

I further modified my already butchered rivet puller to better pull the blind rivets used to attach the 8 fuel line brackets. I used the bench grinder to remove metal at the top of the puller allowing it to fit more square to rivets in the tight confines adjacent the brackets. In conjunction with my small wedge tool fabricated from scrap trailing edge lets the puller work when you can't get the puller fully square to the rivet factory head. Because of the tight confines it took hours to do the 24 rivets on the brackets but I got it done with a minimum of drama. From there I began disassembly of the fuel selector valve for its installation prep.