Scott's RV-14 Build

Aileron Trim Assembly

Finished up the aileron trim assembly on the right wing. Got the servo and actuating arm installed in the mounting bracket and the bracket installed on interior of the lower right wing access cover. It's held in place with #8 flush screws. There are small brackets that are also installed on the aileron pushrod. These two pushrod brackets connect to the actuating arm with large springs. The actuating arm is moved electrically through the servo thus applying tension to the springs and moving the ailerons to the trimmed position. Normal control movements on the stick overpower the springs when hand flying. Last thing to do is crimp connectors on the ends of the 5 servo wires.

Previous post:
Aileron Trim Bracket Aileron Trim Bracket

This post is from Scott's RV-14 Build