Adam Dickson

Deburred and edge smoothed right hand rear spar channel

4 years ago
| Working on: Main wing

Smoothed off edges with 120 grit, then 240 grit, then Vlies 320 grit pad

Knocked off burrs around holes with 800 grit, then finishes off with tool

Author

avatar
Adam Dickson Patreon Donor
Slow-build of a TAF Sling 2 under E-AB category
Profile
Previous post:
Removed scratches from right hand rear spar channel

This post is from Adam Dickson

Next post:
Stripped down centre part of elevator aiming for better skin fir and to treat the stainless rivets with duralac Stripped down centre part of elevator aiming for better skin fir and to treat the stainless rivets with duralac