Final tweaks before closing wings

I made a few adjustments before attaching the top wing skins.

Inserted spacers into the wiring straps on each of the ribs 3. This was done in the style of the plans but with shorted pieces of plastic tubing so as to ensure the cable could not drift into the proximity of the aileron pushrod if the tubing was to swing upwards

Additional strapping around the cables.

Adjusted the USB power supply wiring to enable the backet to be shifted along one step if decided, and placed the addtiional straps ready to be closed.

Placed additional and stringer strapping around the pitot tubing fittings.

Added stainless steel M4 washers under the pitot mount tube mast M4 bolt heads

The AOA and pitot tube markings - placed 20mm from the cut end of the tubing and about 5mm from the end of the fitting was extended around the tube to make it more visible to inspection