Section 28 Aileron Bellcrank & Pushrod Assembly

Cleco aileron mid bellcrank.

Final drill outboard holes to #12.

Debur holes.

Cleco mid bellcrank together 2x.

The mid bellcrank is the same when mirrored.

Rivet mid bellcrank using specified rivets with P-squeezer, 2x.

Cleco outboard bellcrank. This bellcrank is NOT the same when mirrored and care must be taken to ensure correct orientation of the extended bearing to create the mirrored assemblies. Noted in the WIKI.

Final drill outboard holes to #12.

Debur holes.

Cleco outboard bellcrank, 2x.

Rivet bellcrank using specified rivets and P-squeezer. Note that the rivet callout for the outboard bellcrank is NOT the same as the mid bellcrank.