Fuse Feb 24 2025

Fabricated the angle aluminum for the VPX PRo digital circuit breaker system to mount under the panel between the subpanel and the firewall. Match drilled the holes from the VPX Mounting angles in the angle aluminum. Still need to figure out what nutplates/mounting configuration i want to go with

Fabricated a mounting plate with match drilled holes from the fuel selector mount in the plate and then match drilled rivet holes from the stock fuel selector mount into the plate.

Made a mistake when drilling the rivet holes and accidentally drilled into one of the fuel inlet pieces. Will have to order a replacement from Andair. Put on a drill stop before drilling the remaining holes.

Also drilled the hole for the second com antenna through the bulkhead.