Engine May 10 2026

Borrowed the engine hoist from the EAA chapter and brought it down to the hangar. Needed to pull off the flywheel to be able to send it to FlyEFII so they can install the magnets for timing into the flywheel. Also pulled off both mags and installed the blank off plates. Pulled off the fuel pump as i also do not need that with the fuel pumps that i am using from EFII. Blank off plate went onto that pad. Was able to install the forward alternator onto the engine. Need to reach out to B&C to understand how to install the secondary alternator that goes onto the rear accessory pad on the engine. I don't understand how the green spacer is supposed to be installed.