Avionics Nov 9 2026

3D printed a template to cut out holes for the lemo, headset and mic jacks, the primary o2 port for both the pilot and copilot, and the emergency o2 port in the middle. In the process of drilling out the holes, unfortunately cracked the plastic insert for the armrest, but should be able to epoxy it back together and shouldn't be able to see the crack. Permanently wired in the pilot headset to the lemo and mic/headphone jacks. Tested once everything was soldered together and no issues! Shorted the power and data cables for the flap motor and installed gold plated plugs for those connections. Repeated the same thing for the copilot headphone jacks, but couldn't get more than intermittent static on the headphone and mic jacks.