Wing prep
Finished deburring the wing ribs, clecoed the doubler plates into place and called it a night. Need to primer dip (and let dry) the stainless steel rivets so I’ll do that tomorrow.
![Stack o’ ribs, freshly and completely deburred. Finally.](https://d3gxvd7rqm4plm.cloudfront.net/john-s/images/6088/wing-prep/8cd9ff15959147148d03fe9dc30641be_sm.jpg)
Stack o’ ribs, freshly and completely deburred. Finally.
![Freshly primed on the primed and painted rear spar](https://d3gxvd7rqm4plm.cloudfront.net/john-s/images/6088/wing-prep/d6c593e8650f4514b1df0337c451a5fd_sm.jpg)
Freshly primed on the primed and painted rear spar
![Remembering to not rivet the doubler plate until later…](https://d3gxvd7rqm4plm.cloudfront.net/john-s/images/6088/wing-prep/99fb4c5c95e245beb3129175bab57fd1_sm.jpg)
Remembering to not rivet the doubler plate until later…
![Doubler plate](https://d3gxvd7rqm4plm.cloudfront.net/john-s/images/6088/wing-prep/ae225c0f1fcb4dfe886723bf23fd699c_sm.jpg)
Doubler plate
This post is from John's Rans S-21 Outbound