Firewall Forward

All oil/fuel lines are now complete.

Oil cooler installed.

Scat tubing for cabin heat.

EGT probes installed. The exhaust is already pre-drilled for the probes.

Heat muffs installed for the cabin heat.

A view from the bottom, nice and clean design.

Hangar installed on the exhaust.

Exhaust is started. I read that inserting the tailpipe before the nose gear will save some headaches, I did this only to find that I had the Y reversed and had to hoist the nose disengage the nose gear and fix. So much for saving the headache.

High Temp RTV is used to seal all potential air leaks.

Now to finish the baffle seals. These are all pre-cut and drilled for simple installation.

Here is the K&M air filter installed.

Alt air installed.

This shows the clearance for the snorkel and how well it is designed.

Drilled airbox for epoxy bonding.

Mixture linkage installed.

Final fit for the Snorkel.