Firewall - cabin heat vents, Vertical Power PPS

Today I installed the cabin hot air vents and the Vertical Power PPS. I also made an aluminium angle bracket to stiffen the firewall behind the battery case. I’m waiting for some more Adel clamps to arrive to finish the installation. Just the hydraulic reservoir left to mount tomorrow and it’ll use one of the firewall attachment bolts that secures the battery case.

Still undecided about an oil filter, but there’s no hurry as I can proceed with the oil screen. I’ve left plenty of room on the firewall above the oil cooler to mount a remote oil filter if I decide to proceed.

I installed the cabin heat vents on opposite angles as this will allow each cable to have a more relaxed curve while still discharging the hot air downwards when selected off.