Neville's Bearhawk

Exhaust pipes

This afternoon I mounted the exhaust pipes by their supports. It involved quite a lot of head scratching and in the end I’ve decided to use two studs on the accessory hydraulic case, and one below the magneto mounts.

I fashioned some small lugs to fit from steel and they’ve worked well. There’s not much clearance between the left heat muff and the oil cooler, so it took some time to work out the best way to do this.

I’ll finish the left one tomorrow but meantime the right one is complete.

Previous post:
Exhaust pipes Exhaust pipes

This post is from Neville's Bearhawk