Horz. Stab Fairings
Over the past couple days I got the patches bonded to the rear of the stab fairings. I'm happy with the gap and symmetry between the fairings and elevator horns. Today I applied a fillet of flox to the interior junction of the patch and fairing then added a single layer of cloth to the interior over the patch and filet to reinforce it all. Tomorrow it'll be cured and I can do final sanding and get both fairings installed.

Bonding the patches to the rear opening of the stab fairings.

The gaps between the fairing and elevator horns came out just right.

Added a fillet of flox around the joint and added a layer of cloth over it all.

The cured patch. Needs to be reinforced from the rear before final sanding.
This post is from Scott's RV-14 Build