Forward Wiring Harnesses

Got both left and right WH-125 forward fuselage wiring harnesses roughed into the center tunnel, with leads going out to the wings, both control sticks, power port, both mics jacks, flap motor, fuel pump and to the aft fuselage harness connectors for lighting, autopilot servos and stab trim. Since they came from Steinair with the connectors attached it took some finessing and patience to get everything in place. I also ran the coax for the GPS/WAAS antenna and ELT through the center tunnel and the pitot static line. As I get ready to install the rollbar, I felt having the wiring in place now will be easier than waiting. There's still a lot of work to be done adding bushings and securing everything so there's no chaffing or rubbing while in close proximity to the control sticks and pushrods.