512WH Bushby Mustang II

Entry: Sun Jan 19 2020

Started prepping, cleaning, dimpling the top skin. Found out 2 of the skin stiffener for the top skin were too short (supposed to be 11.125”) so I will cut out some .020 and bend them at work tomorrow to make some the correct size.

I decided to rivet the spar and ribs to the bottom skin as the instruction said to do at this point.

After I finished riveting the bottom skin to the spar and ribs, I decided to clecko the top skin onto everything to make sure nothing twisted.

Good news! Everything still fits!

Previous post:
Entry: 2020-01-13 Entry: 2020-01-13

This post is from 512WH Bushby Mustang II