Neville's Bearhawk

Cargo Door, Fuel Pump.

Cargo Door

Attached the forward cargo door to trial fit it. Adjusted the latch with a Dremel, fits very well. Seems to have bonded very well too. I’ll give it a full week to cure then try to prise the skin off to test strength. Overall very happy so far.

Fuel Filter and Pump

Removed the fuel filter from the system and changed the orientation of the fuel pump. I haven’t received my gascolator yet, but when it arrives I’ll check that it has a filter in it. This will allow me to plumb the gascolator directly to the pump. I will get flexible lines made up to feed the fuel flow transducer, and plan to mount it also under the left floor panel.


Gear Legs

Added spacer washers to the hydraulic bulkhead fittings at the top of both gear legs. They are now ready for covering.


This post is from Neville's Bearhawk