Baffle grommets, static line, pitot line, AOA line
Baffle grommets
I added both plastic baffle grommets around the spark plug leads today. They bolt into place and provides a good seal.
Static line,
The static line was cut to length and pressed into the ADHRS fitting. The steel fitting is an NPT thread on the other end.
Pitot line & AOA line
I ran both lines down the right side windshield pillar after discovering that the simply wasn’t enough room on the left pillar. I then added a plastic sheath and pressed them into their respective ADHRS fittings.
I plan to add AN fittings to provide a join at the wing root for both lines.
This post is from Neville's Bearhawk